24 Hour Service - 7 Days a Week
If you woke up to a cold shower, there’s a good chance the pilot light on your water heater has gone out. Learn how to turn it back on and you’ll be known around your house as the keeper of the flame.
Optional: a flashlight.
Gas vapors can be dangerous. Check around the gas heater and lines before igniting the pilot. If you smell gas or suspect a leak, turn off the supply and call the utility company or a professional like Black Mountain Plumbing for help.
Step one: Turn the temperature knob on the outside of the unit to the lowest setting. Use a flashlight to see the small parts and lettering on the water heater.
Step two: Find the metal access panel under the knobs near the bottom of the heater and remove it. Also, remove the inner-heat shield panel. Look inside for a flame—if you see one, the pilot is already lit and is probably not the source of the problem.
Step three: Turn the gas control knob to the off position and wait a minute for any leftover gas to clear the line. Blow gently through the access door to disperse any remaining gas vapors.
Step four: Now turn the control to the pilot setting and hold a lit match or lighter in the opening near the end of the metal pilot supply tube. Some models require you to press and hold a button that says pilot, instead of a knob.
Step five: Press and hold the reset or pilot button on the control box until the pilot lights and continue to hold it for 60 seconds after the pilot is lit.
Step six: After 60 seconds, turn the control knob to the on position.
Step seven: Repeat the process once if the pilot did not light the first time
Step eight: Replace the access panels to the heater and set the temperature knob to the desired setting. Wait a while for the tank to heat up and you’re back in business.
Did you know, that heating the water for one household typically costs $200 to $600 per year? Cut back on your water heating costs by using less hot water or switching to a water heater with an Energy Star logo. For more energy and water-saving tips visit us on Facebook.
Black Mountain Plumbing Inc. is your source for excellent, American-made water heaters. We repair, replace, install and haul away your old water heater. Trust a plumber from Black Mountain Plumbing to do the job right call 858-536-4161.
Serving San Diego and San Diego County for over 25 years with quality work and great service. We also service these cities – El Cajon, La Mesa, Lakeside, Poway, Ramona, Santee, Pacific Beach, La Jolla, University City, Tierrasanta, Rancho Penasquitos, Rancho Bernardo, Rancho Santa Fe, Encinitas, Del Mar, Solana Beach, Leucadia, Sorrento Valley, Miramar, Mira Mesa, Scripps Ranch, Vista, Carlsbad, San Marcos, Fairbanks Ranch, 4S Ranch, and Sabre Springs.
