Bathroom Plumbing Tips to Keep Yours Running Efficiently

Your bathroom endures a lot of punishment. From overflowing sinks to constant toilet flushes, and from warm showers to long baths, the bathroom plumbing maintenance required for this important room is no small feat.  Although ongoing upkeep and proper use can aid in giving a washroom longevity, there are six signs to be mindful of that may require more than the usual TLC to keep your bathroom operating efficiently..In this post we go over several bathroom plumbing tips that every homeowner should know.

Six Bathroom Plumbing Tips

Knocking pipes

If knocking pipes are heard with the sink or tub on, you have an issue. Pipe knocking may derive from several instances, such as “water hammer,” which involves loose valves in the pipe system, pressurization of the pipe after use, loose support straps, or high water pressure. The latter two (over 60 PSI in a household) are particularly destructive, as they stimulate pipes into shifting and jerking in place. If left untreated, your plumbing might produce pipe links, or the pipes might get loose from their mountings.

Low water pressure

Having the shower or tap turned on at full power will cause a consistent water stream. If the pressure doesn’t improve, it might be necessary to contact a professional plumber for assistance. Low water pressure can result from several causes, such as pipe clogs, burst pipes leaking behind walls, or damaged water heaters.

Consistent dripping

If you have a regularly dripping shower or sink, even if it’s being dropped slowly, you have a problem. It’s feasible that the pipes have high water pressure, or water hasn’t been correctly drained after the taps have been shut off. It’s also feasible that the valve that regulates the shower head or tap’s on/off setting has malfunctioned. Small as the issue may be, ongoing dripping can be irritating and produce long-term damage to your bathroom plumbing if not resolved.

Slow drainage

All homeowners have endured a slowly draining sink or tub, and it’s usually a fixable issue that involves the use of a pipe snake, boiling water, or commercial cleaners. However, if this approach proves unsuccessful, odds are your drainage issue is an aspect of the actual bathroom plumbing. This could imply that a pipe is broken, or that pooled water in your main drain is still lingering. Unmoved water can be a danger to your heath, and broken pipes imply that water, rather than mold, lurks behind the walls.

Water keeps cooling

Every hot water tank comes with a maximum capacity; if too much is used too fast, you’ll have to wait longer before it heats up again. However, you have a problem if the shower was used just once that day and the water runs cold for a few minutes. Odds are that the problem lies with your water heater, which might not be able to maintain a regular temperature, or has sprouted a leak. Either way, this is not something you can fix on your own – you need the services of a professional plumber.

Unclear water

The water emitting from your pipes should be transparent. If you see water that has color to it, you should call a plumber. Cloudy or white water generally implies that there is air in your pipes; while red, brown, or yellow water suggests rust, which is usually the result of old water pipes or a main water break in your neighborhood. Green water implies a corrosion of copper plumbing, and blue water suggests that the corrosion has neared completion. Regardless, a plumber should be contacted right away.

Bathroom Plumbing Tips

Important Bathroom Plumbing Tips That Will Save You From a Few Headaches

A good residence should have a high quality plumbing system. There could be times, however, when your plumbing system needs work and you can’t pay to call an expert, or you do not have time to wait at home for one. Read on to learn some remarkably beneficial ideas to assist you to keep your residential plumbing San Diego system in wonderful form all by yourself!

• Once a week run hot water down the drain to help keep it free-flowing.
• There are many methods to unclog a drainpipe. You could attempt plunging it initially. If that doesn’t work try using some baking soda and some vinegar. You can mix those together and put them in the drainpipe and try to plunge it. If all else fails call your plumber.
• Repair leaky faucets to prevent wear to the installations and taps.
• Tubs and showers need to be fitted with strainers that capture hair and soap residue. Clean the strainers on a regular basis.
• Do not use your toilet as a wastebasket. Do not flush face tissues, cotton balls, make-up pads, sanitary items or baby diapers as they do not liquefy and could clog the lines. Place a garbage container in each washroom and toss these things away.
• Orange or pink staining on your washroom fixtures is a strong indicator that your water consists of excessive iron. To get rid of this issue, you could either make use of a commercial item to soften the water, or have a plumber come your home and do help you.

 Showerhead Maintenance – Bathroom Plumbing Tips

• Showerheads create jagged spray when the holes are blocked with mineral deposits from the water.
• To clear mineral deposits from your showerhead, try soaking in white vinegar. Simply add a cup or two of vinegar to a plastic bag and tape it around the showerhead, making certain that it is submerged. Leave the bag on for a hour, and the vinegar will certainly dissolve the mineral buildup, enabling water to spurt through like it was when it was new.

Screening a Toilet for Leaks – Bathroom Plumbing Tips

• Check meticulously around the base of your toilet for any kind of damage caused by leaks. Sit in a reversed position, putting one foot on each side of the toilet and shift your weight back and forth to check if the flooring feels slightly unsteady. Uncovering this concern faster could mean huge savings for your checking account, as compared to learning about it later on.
• Inspect the water level in the tank to ensure that the water is not overflowing through the overflow pipe (the pipe in the middle of the storage tank with a small piece of tubing attached to it).
• If water is running into the overflow pipeline, adjust the fill valve until the water quits around one inch below the top of the overflow tube (there may be a water level mark printed on the side of the tank).
• Test the flush shutoff system by placing a couple of drops of food coloring into the container.
• Inspect the bowl after 15 mins, if the water in the toilet bowl has actually changed color, the ball or flapper is leaking and should be switched out.

If you need a plumber call Black Mountain Plumbing at (858) 536-4161

Please visit our site often to learn more bathroom plumbing maintenance and bathroom plumbing tips.

Serving San Diego and San Diego County for over 25 years with quality work and great service. We also service these cities – El Cajon, La Mesa, Lakeside, Poway, Ramona, Santee, Pacific Beach, La Jolla, University City, Tierrasanta, Rancho Penasquitos, Rancho Bernardo, Rancho Santa Fe, Encinitas, Del Mar, Solana Beach, Leucadia, Sorrento Valley, Miramar, Mira Mesa, Scripps Ranch, Vista, Carlsbad, San Marcos, Fairbanks Ranch, 4S Ranch, and Sabre Springs.