plumbing company San Diego CA
plumbing company San Diego CA

Plumbing Pipe Repair San Diego CA – Black Mountain Plumbing

Call Black Mountain for Plumbing Pipe Repair in San Diego County

plumbing pipe repair San Diego CAOne of the most common water damage problems that homeowners face is burst or leaking pipes. Many different factors can cause your pipes to leak or rupture such as the age of them, misuse or if they freeze. Although prevention can be carried out, no one is safe from pipe damage.When you discover that you have a burst pipe, you need to act fast – if the problem goes ignored for too long, it can turn into a massive disaster. To minimize the amount of damage that your home suffers from, contact a professional plumbing company as soon as possible for a plumbing pipe repair.

How to prevent needing pipe repair

When you have burst or leaky pipes in your home, it can be quite a distressing experience. If you want to prevent burst pipes and plumbing pipe repair in your home, there are a few tips and tricks that you can follow:

  • Schedule regular maintenance with your plumber. This should include professional drain cleaning, to get rid of any buildup of hair, sludge, grease, debris, toilet paper, and oil.
  • If you have any leaks or dripping faucets, get them fixed before the cold winter days arrive.
  • Pipes that are in your attic, garage or basement can be exposed to the cold frequently so they should all be lagged.
  • Insulate all of your outdoor pipes and faucets to avoid leaky pipes. Bends and joints should not be left exposed; fitted covers are available for outdoor fixtures.
  • If any of your pipes are underneath the ground, they need to be buried quite deep, or you will need to insulate them.
  • During the cold winter days, leaving your heating on can prevent burst pipes. Leaving it on at twelve degrees centigrade is just warm enough to stop the water in the pipes from freezing.
  • On days that are a lot colder, leave the hatch to your attic open – this allows some of the warm air in your home to rise into your attic and keep the pipes up there warmer.

 

What you should do in the event of a burst pipe

Even after following the above tips on how to prevent repairs, broken or leaky pipes can still happen. If you have a burst pipe in your home, here’s what you need to do:

  • You should know the location of your main water supplies stopcock valve in case you need to turn it off in the event of any pipe leaks. If you have or suspect a burst pipe, turn off the stopcock and drain all of the water from your faucets.
  • Look out for signs of a leaky or burst pipe. The most visible sign that it has burst is if there is any water flowing in from your ceilings. If you see any damp patches on your ceilings, floors or walls, these are signs that you could have a burst or leaky pipe. Other things to look out for are low water pressure, electrical faults and unusual noises.
  • In the event of a burst pipe, the water should be removed as quickly as possible. The faster the water is removed and cleaned up the less water damage sustained to your home.
  • If any of your belongings or furniture are in the affected area, move as much of it as possible to a room that is unaffected – this will keep it safe and water damage free.
  • It is imperative to remember that you do not use any electrical devices while you have a burst pipe. Don’t turn light switches or socket switches on or off as the water could have gotten into the power circuit.

 

How to quickly fix a burst or leaking pipe

The first thing you need to do is slow down the leak as much as possible while you are waiting for your plumber to arrive. You can slow down or temporarily pause the leak in a few different ways:

  • Duct Tape – If you have a leak that is coming from a small opening in your pipe, applying some duct tape over the hole can stop the leak until professional help arrives. It can only withstand so much water pressure so using it over a larger hole would be almost useless.
  • Sleeve Clamp – A sleeve clamp can be used to help slow down small and large leaks. You first need to wrap the gasket material around the area where the pipe is damaged – you then need to apply both halves of the sleeve clamp around the gasket material and tighten up all of the screws
  • C-clamp – With a c-clamp, some rubber and a block of wood, you can temporarily stop a small leak. You first need to turn off your water supply at the stopcock valve – once you have done that, place the rubber piece over the opening where the water is leaking from, put the wood block on top of the rubber and then attach the c-clamp over them both and around the pipe. You want to tighten the clamp until it is fully secure.

 

Remember, these are only temporary fixes. To secure a permanent fix, you will need to call expert plumbers for plumbing pipe repair.

Get in touch with a professional plumbing service

If you need a plumbing pipe repair or professional drain cleaning, call Black Mountain Plumbing at (858) 536-4161. We offer quality service for homeowners throughout San Diego County and can do the same for you.

 

Posted on by bmpadm in Featured, Plumbing Repairs San Diego