24 Hour Service - 7 Days a Week
What You’ll Need for changing Water pressure:
If you discover a problem with the water pressure in your house, it might indicate that you have to make a couple of changes to the water pressure regulator. Most houses do not have an actual pressure regulator set up, however if you have one and it is not adjusted effectively, you might have either too much, or insufficient pressure in your faucet or shower. With the right devices, you will be able to adjust the water pressure regulator by yourself instead of employing a licensed plumber.
Step 1 – Locate the Supply Line
First you need to locate the water line that provides water to your residence. Once you have actually found the line you will certainly be able to find the water meter. This is typically installed in the basement, if you have one. If you live in an apartment or a home on top of a crawl space in cooler environments, the meter is normally not in the crawl space as it might freeze, it may be under the cooking area sink or in an utility room.
Step 2 – Find the Valve (Regulator)
As soon as you have found the water meter, find the valve. The valve is made of brass and has a bell shaped mid-area with a medium sized screw at the tip of the bell. Make sure that your supply line has adequate pressure before adjusting the pressure valve.
Step 3 – Adjust the Screw
Now that you have located the valve and the screw, you need to loosen the locknut all the way with the wrench. The screw is your adjuster and it can be steered just by loosening the locknut. As you tighten the screw the water pressure ends up being greater and as you loosen the screw the water pressure reduces. Turn the screw clockwise to tighten it and enhance the pressure, or turn it counterclockwise to reduce the pressure.
Do not be too rash. You need to tighten the screw little by little, in slow increments. Examine the result each time you tighten up the screw. If the water pressure is too high, it could result in leakages and forcing the toilets to run all the time.
Step 4 – Check the Pressure
Once you have adjusted the screw the water pressure you need to check that it is now at an acceptable level. Inspect the faucets in your home to see if the pressure is now as you want it. Also be sure to check there is no leaking at the pipes.
If you find that after adjusting the pressure valve there is no significant enhancement, your valve might be defective and will need to be changed.
Changing a valve could be a bit challenging and it is usually best to seek help from an experienced, professional plumber
Water shortages are a major problem every year in California. Because of the limited rainfall each year in San Diego County, the possibility of a water shortage, which could some day result in mandatory water conservation, has always been a real threat. In the past, businesses and residents have been asked to save water; now they are no longer asking, they are requiring water conservation and reducing water pressure.
According to the Association of California Water Agencies, unfortunately, “this year’s highly-anticipated El Niño was not a statewide drought-buster. While storms boosted storage in some Northern California reservoirs, they sputtered out in the Southern part of the state.
The uneven recovery and possibility of dry conditions next year means that the drought is not over yet.”
Here at San Diego’s best reviewed and leading plumber, Black Mountain Plumbing, we always advise residents to conserve water throughout the year, as there are a multitude of benefits which are associated with water conservation. By reducing water pressure, water is saved which results in having more water available throughout the entire year. There is also a great deal of money saved when water pressure is reduced.
Using a high-quality pressure regulator is one of the best ways for you reducing water pressure. Nowadays the majority of homes are equipped with these units. They control the amount of pressure allowed to various fixtures within your home such as showers and faucets and are considered a plumbing safety feature. With age, these regulators sometimes begin to wear out, or just do not work as efficiently as they did when they were new. Because of this, it is important that you have your regulator checked occasionally. It is our policy at Black Mountain Plumbing, to check the home water pressure of all of our customers; this pressure is also known as PSI. We have been trusted for over 25 years by San Diego residents with their plumbing, and you can trust us too.
If we locate a problem with your pressure regulator, we have the knowledge and expertise to quickly and efficiently replace it. There are a number of plumbing services that we offer which include the installation of top quality water pressure regulators.
In order to conserve as much water as possible and save money, our plumbers in San Diego suggest that in addition to the installation of a properly functioning high quality pressure reducing valve, homeowners should also take the time to consider other water saving fixtures. These might include high–efficiency toilets and low–flow shower heads. Our plumbers can teach you how the water pressure regulator works; they will show you where the regulators are located and instruct you how to maintain the water pressure at a level that is reasonable so that you are able to maximize your water conservation efforts.
Serving San Diego and San Diego County for over 25 years with quality work and great service. We also service these cities – El Cajon, La Mesa, Lakeside, Poway, Ramona, Santee, Pacific Beach, La Jolla, University City, Tierrasanta, Rancho Penasquitos, Rancho Bernardo, Rancho Santa Fe, Encinitas, Del Mar, Solana Beach, Leucadia, Sorrento Valley, Miramar, Mira Mesa, Scripps Ranch, Vista, Carlsbad, San Marcos, Fairbanks Ranch, 4S Ranch, and Sabre Springs.
